Filter
Top Products
11
GB
Getting Started
Side
For details on each indicator, see “Indicator information” (page 47).
D ?/1 (ON/Standby) button, indicator
Press to switch between power on and the
standby mode (page 18).
Indicates the power status of the unit
(page 18).
Green: The unit is turned on.
Amber: The unit is in the network standby
mode.
Red: The unit is in the standby mode.
E AUDIO IN button, indicator
1)
Press to switch the audio input on or off.
Lights in green when the audio input is on.
F UPDATE button, indicator
Press to start updating the software of the
unit (page 36).
Indicates the update status of the unit.
Green (lit): The unit can be updated.
Green (flashing): The unit is updating.
Red (flashing): An error has occurred.
Not lit: The unit does not need updating.
G LINK indicator
Indicates the connection status of the
wired/wireless LAN.
Green: Wireless connection (page 20).
Amber: Wired connection (page 24).
Red: The following status have occurred.
– This unit cannot find the wireless
LAN access point.
– The security method/password
selected for the access point is wrong.
– An error has occurred.
Not lit: The wireless network setting
process is not finished.
H VOL +
2)
/– buttons
Use to adjust the volume. The illumination
indicator flashes rapidly when the volume
level is set to either minimum or
maximum.
1)
Home network/AirPlay/Internet music streaming
is selected automatically when the AUDIO IN
indicator is off.
2)
The VOL+ button has a tactile dot. Use it as a
reference point for operations.