Sony SA-NS310 Car Speaker User Manual


 
18
GB
The supplied lithium battery (CR2025) has
already been inserted into the remote control.
Pull out the protective sheet before use.
Replacing the battery of the
remote control
If the remote control stops working, replace
the battery (CR2025) with a new one.
1 Pull out the battery holder.
2 Remove the old battery from the battery
holder then insert a new battery so that “+”
is facing upward.
3 Reinsert the battery holder into the remote
control.
Turning the Unit On
Make sure the unit is connected to
an AC power source (page 17).
The ?/1 (ON/Standby) indicator flashes in
green and the illumination indicator lights.
You can operate this unit when the ?/1 (ON/
Standby) indicator lights in green and the
illumination indicator lights. It may take a
while.
Preparing the remote control
SA-NS410
SA-NS310