Filter
Top Products
12
Locating a disc by name
— List-up (For a CD unit with the CD TEXT/
CUSTOM FILE function, or an MD unit)
You can use this function for discs that have been
assigned custom names*
1
or for CD TEXT
discs*
2
.
*1 Locating a disc by its custom name: when you
assign a name for a CD (page 11) or an MD.
*2 Locating discs by the CD TEXT information: when
you play a CD TEXT disc on a CD unit with the CD
TEXT function.
1 During playback, push the jog roller.
The name assigned to the current disc appears
in the display.
2 Rotate the jog roller until you find the
desired disc.
3 Push the jog roller to play the disc.
Notes
• Some letters cannot be displayed (exception: Disc
Memo).
• If you do not perform any operation for more than 5
seconds with the list displayed, the display returns to
normal playback mode.
Operating with the card remote
commander
1 During playback, press (LIST).
2 Press (DISC/PRESET -) or
(DISC/PRESET +) repeatedly until you
find the desired disc.
3 Press (ENTER).
Selecting specific tracks for
playback
— Bank (For a CD unit with the CUSTOM FILE
function)
If you label the disc, you can set the unit to skip
or play the tracks of your choice.
1 Start playing the disc you want to
label.
2 Press (MENU), then rotate the jog
roller until “Bank Sel” appears.
3 Push the jog roller.
4 Label the tracks.
1Press (SEEK/AMS -) or (SEEK/AMS +)
repeatedly to select the track you
want to label.
2Push the jog roller to select “Play”
or “Skip.”
5 Repeat step 4 to set “Play” or “Skip”
for all the tracks.
6 Press (MENU) twice.
The unit returns to normal CD play mode.
Notes
• You can set “Play” and “Skip” for up to 24 tracks.
• You cannot set “Skip” for all the tracks on a CD.