Filter
Top Products
8
Notes on Cassettes
Cassette care
• Do not touch the tape surface of a cassette, as
any dirt or dust will contaminate the heads.
• Keep cassettes away from equipment with
built-in magnets such as speakers and
amplifiers, as erasure or distortion on the
recorded tape could occur.
• Do not expose cassettes to direct sunlight,
extremely cold temperatures, or moisture.
• Slack in the tape may cause the tape to be
caught in the machine. Before you insert the
tape, use a pencil or similar object to turn the
reel and take up any slack.
• Distorted cassettes and loose labels can cause
problems when inserting or ejecting tapes.
Remove or replace loose labels.
• The sound may become distorted while playing
the cassette. The cassette player head should be
cleaned after each 50 hours of use.
The use of cassettes longer than 90 minutes
is not recommended except for long
continuous play
The tape used for these cassettes is very thin and
tends to stretch easily.
Frequent playing and stopping of these tapes
may cause them to become entangled in the
cassette deck mechanism.
Getting Started
Resetting the unit
Before operating the unit for the first time, or
after replacing the car battery or changing the
connections, you must reset the unit.
Press the reset button with a pointed object, such
as a ball-point pen.
Notes
• Pressing the reset button will erase the clock setting
and some stored contents.
• When you connect the power supply cord to the unit
or reset the unit, wait for about 10 seconds before
you insert a CD or cassette. If you insert a CD or
cassette within these 10 seconds, the unit will not be
reset, and you will have to press the reset button
again.
• When you press the reset button or (OFF), the
demonstration display will appear in the display. To
deactivate the demonstration display, set the Motion
Display mode to off (page 19).
Slack
SEEK/AMS
MD
CD
EQ7DSO
OFF
SCRL
SA
SOUND
MENU
DSPL
ATT
SOURCE
SEEK/AMS
MODE
Reset button