Filter
Top Products
16
Storing station names
— Station Memo
You can assign a name to each radio station and
store it in memory. The name of the station
currently tuned in appears in the display. You can
assign a name using up to 8 characters for a
station.
Storing the station names
1 Tune in a station whose name you
want to store.
2 Press (MENU), then rotate the jog
roller until “Name Edit” appears.
3 Push the jog roller.
4 Enter the characters.
1Rotate the jog roller to select the
desired character.
A t B t C ... t 0 t 1 t 2 ... t +
t – t
*
... t * t A
* (blank space)
2Press (SEEK/AMS +) after locating
the desired character.
If you press (SEEK/AMS -), you can move
back to the left.
3Repeat steps 1 and 2 to enter the
entire name.
5 Push the jog roller.
Tips
• Simply overwrite or enter “” to correct or erase a
name.
• There is another way to start storing station names:
Push the jog roller for 2 seconds instead of
performing steps 2 and 3.
Displaying the station name
Switch the display item to frequency or station
name*.
* If the station name is not stored, “NO Name”
appears in the display for one second.
Erasing the station name
1 During radio reception, press (MENU),
then rotate the jog roller until “Name
Delete” appears.
2 Push the jog roller.
3 Rotate the jog roller to select the
station whose name you want to
erase.
4 Push the jog roller for 2 seconds.
The name is erased.
Repeat steps 3 to 4 if you want to erase other
names.
5 Press (MENU) twice.
The unit returns to normal radio reception
mode.
Note
If you have already erased all of the station names,
“NO Data” appears in step 4.
To Press
Switch display
item
(DSPL) during radio
reception