Filter
Top Products
14
Playing a tape in various
modes
You can play the tape in various modes:
• Met
al lets you play a metal or CrO2 tape.
• BL.Skip (Blank Skip) skips blanks longer than
8 seconds.
• ATA (Automatic Tuner Activation) turns on the
tuner automatically when fast-winding the tape.
• NR (Dolby NR) lets you select the Dolby* NR
B system.
* Manufactured under license from Dolby
Laboratories. “Dolby” and the double-D symbol are
trademarks of Dolby Laboratories.
1 During tape playback, press (MENU).
2 Rotate the jog roller until the desired
mode appears.
3 Press (SEEK/AMS +) to select “on.”
Example: ATA mode
4 Push the jog roller.
Play mode starts.
To return to normal playback mode, select “off”
in step 3.
Note
Power antennas will extend when ATA is set to on.
Playing tracks repeatedly
— Repeat Play
1 Press (MENU), then rotate the jog
roller until “Repeat” appears.
2 Press (SEEK/AMS +) to select “on.”
3 Push the jog roller.
Repeat play starts.
To return to normal playback mode, select
“Repeat off” in step 2.
Tip
During repeat playback, press (MODE). “REP”
disappears from the display and repeat mode is
canceled.
Radio
The unit can store up to 10 stations per band
(FM1, FM2, and AM).
Caution
When tuning in stations while driving, use Best
Tuning Memory to prevent accidents.
Storing stations
automatically
— Best Tuning Memory (BTM)
The unit selects the stations with the strongest
signals within the selected band, and stores them
in the order of their frequency.
1 Press (SOURCE) repeatedly to select
the radio.
2 Press (MODE) repeatedly to select the
band.
3 Press (MENU), then rotate the jog
roller until “B.T.M” appears.
4 Push the jog roller.
A beep sounds when the setting is stored.
Notes
• If only a few stations can be received due to weak
signals, some stored numbers will retain their former
settings.
• When a number is indicated in the display, the unit
starts storing stations from the one currently
displayed.