Sony XR-F21RDS Car Stereo System User Manual


 
Sony XR-F21RDS (E,F,G) 0-000-000-11 (1)
18
EN
Actual total number:
2 Pressing the
LIST
PTY
button continuously
will display in order the titles of the discs
in the currently selected changer.
Once a disc name has been displayed for
over five seconds, the display window
returns to its normal display.
Turning off the Display
Press the DSPL button again.
Notes
The track titles cannot be displayed (during MD
playback).
If there are no discs in the magazine, “NO Disc” will
appear on the display.
If a disc has not been assigned a custom name,
********” will appear on the display.
If the disc information has not been read in by the unit,
“Not Read” will appear on the display. If the disc
information has not been loaded into the unit, “Not
Read” will appear on the display. To execute loading,
first push the PRST/DISC button, then choose the disc
that has not been loaded.
The information will be displayed only in capital letters.
There are also some letters which cannot be displayed
(during MD playback).
3 When you have found the desired disc,
press the PRST/DISC button to playback
the disc (Direct Search Function).
Note
You can still execute the direct search function even if the
********” message appears on the display (unnamed
disc).
CD Programme
Memory Function
With the CD changer connected
You can preselect the tracks you want to hear
and the order in which you want them to be
played back (from the discs in the changer
connected to the unit). This function is divided
into Programme 1 and Programme 2, each
allowing you to preselect up to 12 tracks.
Furthermore, once a programme is registered,
the track order is preserved. Changing the disc
order in the changer will not affect the order in
which the tracks have been set for playback.
Notes
This function works only when CD changer with
programme memory function are connected.
When a CD changer without programme memory
function is connected, pressing the PGM button for more
than two seconds will not cause the system to enter the
programme edit mode. Instead, “Sorry” will appear in
the display.
If you press the DSPL button momentarily when the
programme edit mode is engaged, the disc number, track
number, and elapsed playing time of the currently played
track will be displayed for one second.
If you press the MD/CD, PRST/DISC and AMS buttons
when the programme edit mode is engaged, the selected
disc number and track number, and the elapsed playing
time will be displayed for 1.5 seconds.
Configuring a Programme
(with tracks you want to hear)
1 Press the
PGM
button for more than
two seconds.
The system will enter the programme edit
mode.
To configure Programme 2, press the
PGM
button again, momentarily.
DISC TRACK
C
D1
531
0
P
1.
Programme 1
Configuration
Indicator
Initial
Programme 1
Indicator
Current Programme
DISC TRACK
C
D1
531
0
P
1.