Filter
Top Products
Sony XR-F21RDS (E,F,G) 0-000-000-11 (1)
20
EN
Actual total number:
To erase tracks in Programme 2, press the
PGM
button momentarily to prompt the
Programme 2 Configuration Indicator.
Notes
• When entering Programme Edit Mode from Programme
Memory Playback Mode, the slot number of the track
currently playing will appear on the display.
• Entering Programme Edit Mode from Normal Playback
Mode:
—When all 12 track slots are filled in the programme,
the number 12 appears on the display.
—When less than 12 tracks have been filled, the number
of the first available slot appears on the display. For
example, if only 7 tracks have been input, the number
8 will appear on the display.
2 Press the or button to
designate which track you wish to erase
(shown on the display).
The track currently registered in the 6 slot of
Programmeme 1.
3 Once designated, press the
SEL
button
for more than two seconds. n The track
will be erased.
Once the track in the 6 slot has been erased,
tracks in the 7-12 slots will move up one slot.
Note
In the case where all 12 track slots are filled in a
programme, erasing one track causes the 12 slot to become
empty (for every erased track, another slot becomes
vacant).
4 A To continue erasing tracks, repeat
steps 2 and 3.
B To finish erasing tracks, press the
PGM
button for more than two
seconds.
New track in slot 6
DISC TRACK
C
D1
471
0
P
6.
The track slot
number
D
E
L
–
1
0
P
6.
––
µ
DISC TRACK
C
D1
281
0
P
6.
Inserting Tracks into a
Programme
1 Press the
PGM
button for more than
two seconds.
The system will enter the programme edit
mode.
If you wish to insert tracks into Programme 2, prompt
the Programme 2 Configuration Indicator by pressing
the PGM button momentarily.
2 Press the or button to
designate to which track slot number
you wish to insert a track.
3 Play the track you wish to insert.
4 Press the
SEL
button momentarily to
enter the track.
The newly entered track will fill the 6 track
slot, and tracks 7 and up will move down
one slot.
Note
Once all 12 slots have been filled, “*Mem Full*” will
appear on the display, and it will not be possible to
insert more tracks.
5 A To continue inserting tracks into the
programme, repeat steps 2 through 4.
B To finish inserting tracks, press the
PGM
button for more than two
seconds.
Program 1
Configuration
Indicator
The track slot
number
P
1
E
N
T
+
E
R+
µ
DISC TRACK
C
D1
531
0
P
8.
DISC TRACK
C
D1
281
0
P
6.
DISC TRACK
C
D1
281
0
P
7.