Sony XR-F21RDS Car Stereo System User Manual


 
Sony XR-F21RDS (E,F,G) 0-000-000-11 (1)
9
EN
Actual total number:
3 FM1 and FM2 only:
Press preset number button
1
INTRO
momantarily, then press again for about
two seconds until you hear a beep tone.
n The station will be stored.
Repeat this operation with preset number
buttons
2
REPEAT
through
10
.
Notes
When “AF OFF” is displayed and you activate BTM, the
unit will store only stations not transmitting RDS data.
Depending on reception conditions however, it may
happen that RDS stations are stored.
When storing only RDS stations (page 11), step 3 is not
necessary.
Memorizing Only the
Desired Stations
1 Select the desired band.
2 Tune in the station which you wish to
store on the preset number button.
3 Keep the desired preset number button
(
1
INTRO
to
10
) pressed for about two
seconds until you hear a beep tone.
The number of the pressed preset number
button appears on the display window.
Up to 10 stations on each band (FM1, FM2, MW and LW)
can be stored on the preset number buttons in order of your
choice. Therefore, 20 stations can be memorized on FM.
If you try to store another station on the same preset
number button, the previously stored station will be
erased.
TUNER
Cassette Player Operation/Radio Reception
Tuning in by Adjusting the
Frequency
— Manual Tuning
1 Select the desired band.
2 Press and hold either side of the PRST/
DISC button.
Release the button when the desired station
is received.
PREVENTING ACCIDENTS!
When tuning in during driving, use the
automatic tuning and the memory preset
tuning instead of the manual tuning.
Memorizing Stations
Automatically
— BTM (Best Tuning Memory) Function
This function selects from the currently
received band the stations with the strongest
signals and memorizes them in order of their
frequency.
1 Select the desired band.
2 Press the
SENS
SCRL/BTM
button for more than
two seconds.
When there is no preset number indicated
on the display window, stations will be
stored on all preset number buttons on the
currently selected band.
When there is a preset number indicated
on the display window, the unit will store
stations on all preset number buttons
from the one currently displayed.
For example, when you select FM2 and preset
number 3 is displayed,
the operation will start from preset number 3 on FM2, and
will stop at preset number 10 on FM2.
TUNER
PRST
DISC
For higher frequencies
For lower frequencies
TUNER