Sony XR-F21RDS Car Stereo System User Manual


 
Sony XR-F21RDS (E,F,G) 0-000-000-11 (1)
24
EN
Actual total number:
The unit starts playing the tracks with “PLAY”
settings which have been set by the PLAY/
SKIP edit mode.
Playing the tracks with “SKIP” settings.
Press the
4
BANK
button several times until you
get the “B.INV ON” indication.
The unit starts playing the tracks with “SKIP”
settings which have been set by the PLAY/
SKIP edit mode.
To go back to the normal playing mode, press
the
4
BANK
button several times until you get the
“B.INV OFF” indication.
Each time you press the
4
BANK
button, the display
on the display window changes as follows:
z BANK ON z B.INV ON z B.INV OFF
Note
Even when you play a disc with the PLAY/SKIP settings,
if the “BANK” indication has not appeared on the display
window, the disc will not be played according to the
settings.
Maintenance
Fuse Replacement
When replacing the fuse, be sure to use one
with the correct amperage which is stated on
the fuse case. Never use a fuse whose
amperage rating exceeds the one supplied to
the unit as this could cause a malfunction of
the unit.
Warning
Use a fuse with the specified amperage.
Use of a fuse with higher amperage may cause
serious damage.
Cleaning the Connectors
The unit may not function properly if the
connectors between the unit and the front
panel are not clean. In order to prevent this,
open the front panel by pressing the RELEASE
button, then detach it and clean with a cotton
swab which was dipped in alcohol. Do not
apply too much force. Otherwise, the
connector may get damaged.
Back of the front panel
Main unit