Filter
Top Products
Programming Options
RF Programmer
The RF Programmer allows you to customize the system to fit the individual needs of the consumer, using
a handheld device capable of transmitting system settings directly to the system control module. The RF
Programmer is broken down into three different programming banks.
1. RF Programmer Bank- The RF Programmer Bank allows you to set up the base features of the
system you are installing. It is very important to understand that the base features of this system can
only be programmed using the RF Programmer. Please refer to the chart below showing factory
default settings to determine what options need to be changed for your system. When using the RF
Programmer to select feature settings is very important to verify that the correct base features remain
at the default settings.
CA-160 RF Programmer Base Features
2. Feature Bank 1- Feature Bank 1 allows you to turn On/Off customer convenience features.
3. Feature Bank 2- Feature Bank 2 allows you to turn On/Off remote start features.
Manual Feature Programming
After installation is complete it will be necessary to program certain system characteristics that can't be
programmed using the RF Programmer (Shock Sensor settings). In addition all of the customer
convenience features and remote start features.
erutaeF
tluafeD
gnitteS
ytiruceS
NO
tratSetomeR
FFO
XTyaW2/yaW1
XTyaW2