Filter
Top Products
8-10 Satellite M100
Optional Devices
Removing the memory module
6. Seat the cover and secure its screw.
7. Replace the battery.
Installing Memory Under Keyboard
Follow these steps to install main memory module:
1. Set the computer to boot mode and turn off the power.
a. The computer is turned on.
b. The computer was shut down using the Stand by mode.
c. Power to the optical disc drive has been turned on by the CD Power
switch.
2. Remove all cables connected to the computer.
3. Turn the computer upside down and remove the battery, refer to Chapter
6, Power and Power-Up Modes.
4. Open LCD to 150~170 degrees angle.
5. Underneath the battery, use screw driver to push up the Keyboard cover;
push it until all hooks are released. Remove the keyboard cover.
3
1
1
2
If you use the computer for a long time, the memory modules will become
hot. In this case, let the memory modules cool to room temperature before
you replace them.
Do not try to install a memory module under the following conditions. You
can damage the computer and the module.