Filter
Top Products
B-2 Satellite M100
Display Modes
Displaying movies on a TV or CRT
This section describes how to set up your system to display movies
simultaneously on your computer's LCD and on an external TV or CRT
monitor.
To connect a television, follow the steps below.
1. Turn the computer off.
2. Use a video cable (not supplied) to connect the television to the video
out port.
3. Turn the television on.
4. Turn the computer on.
You can use the hotkeys Fn + F5 or use the TV-Out button to change the
display device. Refer to Chapter 5, The Keyboard.
If a television is connected to the computer, set the TV type in Display
Properties. Follow the steps below, based on the configuration of your
computer:
For Intel
1. Click Start >Control Panel >Appearance and Personalization>
Personalization.
2. Choose Display setting.
Some of display mode might not be supported depending on the external
monitor which you use.