Chapter 1. Introduction
7
Rear View
No. Component Description
1 Daisy Chain
Port
When daisy chaining units, the cable plugs in here.
2 KVM Ports The cables that link to the computers plug in here.
Note: The shape of these 15-pin connectors has been
specifically modified so that only KVM cables designed to work
with this switch can plug in (See Cables, page 4). Do NOT
attempt to use ordinary 15 pin VGA connector cables to link
these ports to the computers.
3 Power
Socket
This is a standard 3 prong AC power socket. The power cord
from an AC source plugs in here.
4 Power Switch This is a standard rocker switch that powers the unit On and Off.
5 External
Console
Section
For flexibility and convenience, the KL1116 supports an
independent, external, KVM console. The external console's
keyboard, monitor, and mouse cables plug in here.
