Chapter 4. OSD Operation
29
OSD Navigation
To dismiss the menu, and deactivate the OSD, Click the X at the upper
right corner of the OSD Window; or press [Esc].
To Logout, Click F8 or the
Z
Z
Z
symbol at the top of the Main Screen, or
press [F8].
To move up or down through the list one line at a time, Click the Up and
Down Triangle symbols (ST) or use the Up and Down Arrow Keys. If
there are more list entries than there is room for on the Main Screen, the
screen will scroll.
To move up or down through the list one screen at a time, Click the Up and
Down Arrow symbols (ÏÐ), or use the [Pg Up] and [Pg Dn] keys. If there
are more list entries than there is room for on the Main Screen, the screen
will scroll.
To bring the KVM focus to a port, Double Click it, or move the Highlight
Bar to it then press [Enter].
After executing any action, you automatically go back to the menu one
level above.
OSD Main Screen Headings
Heading Explanation
SN-PN This column lists the Port ID numbers (see Port ID Numbering,
page 26) for all the KVM ports on the installation. The simplest method
to access a particular computer is to Click it, or move the Highlight Bar
to it, then press [Enter].
QV If a port has been selected for Quick View scanning (see SET QUICK
VIEW PORTS, page 36), an arrowhead displays in this column to
indicate so.
The computers that are powered on and are On Line have a Sun
symbol in this column to indicate so.
NAME If a port has been given a name (see EDIT PORT NAMES, page 35),
its name appears in this column.
