ATEN Technology KL1116 Manual

A SERVICE OF

next previous

Chapter 3. Basic Operation

21

Closing Together

1. Rotate the LCD module all the way down, then pull and let go of the rear

catches to release the LCD module. (See the diagram on page 20, step 3.)

2. Using the front handle, push the LCD module all the way in until it clicks

into place. (See the diagram on page 20, step 4.)

3. There are keyboard module release catches located on the underside of the

keyboard module (indicated by the triangular markings on the LCD

module cover). Reach underneath the keyboard module; pull these catches

toward you; and slide the module a few centimeters in.

4. Let go of the catches. Using the front handle, slide the keyboard module

all the way in until it clicks into place.