Chapter 10. AP Operation
115
(Continued from previous page.)
A description of the Connection Screen is given in the following table:
Item Description
Menu Bar The Menu Bar contains three items: File, Tools, and Help.
The File Menu allows the operator to Create, Save, and
Open user created Work files (see page 116 for details).
The Tools Menu contains two entries: Keyboard and
Config, (see page 116 for details).
Server List Each time the WinClient.exe file is run, it searches the User's
local LAN segment for KL9108 / KL9116 units, and lists
whichever ones it finds in this box. If you want to connect to
one of these units, double-click it.
Server This area is used when you want to connect to a KL9108 /
KL9116 at a remote location. You can drop down the IP list
box and select an address from the list. If the address you
want isn't listed, you can key in the IP address you want.
Then, key in the Port number in the Port field. If you don't
know the Port number, then contact the Administrator.
When the IP address and Port number for the unit you wish to
connect to have been specified, Click Connect to start the
connection. When you have finished with your session, Click
Disconnect to end the connection.
Message List Lists status messages regarding the connection to the
KL9108 / KL9116.
Switch to Remote View Once contact with a KL9108 / KL9116 has been established,
this button becomes active. Click it to switch and take over
console control of the unit that is attached to the KL9108 /
KL9116.
The screen output of the unit appears on your monitor. Your
keystrokes and mouse movements are captured and sent to
the KL9108 / KL9116 to be executed on the attached unit.
If the KL9108 / KL9116 is connected to a KVM switch, you
can control the switch and the computers connected to it just
as if you were connected locally.
Change Password This button becomes active after a connection to a KL9108 /
KL9116 unit has been established. It allows the User to
change the password used to log in to the KL9108 / KL9116.
