Appendix
161
Optional Rack Mounting
For convenience and flexibility, three optional rack mounting kits are available
as shown in the following table:
To install the long bracket standard rack mount kit, simply replace the short L
brackets on the standard rack mount kit with the long ones, and mount the
switch according to the instructions given for Standard Rack Mounting,
page 14.
While it takes two people to perform a standard installation, with an Easy-
Installation, kit, one person can mount the switch. To install the Easy-
Installation kit, do the following:
1. Remove the standard L brackets and the side mounting brackets from both
sides of the switch.
KVM Model Bracket Type Size (cm)
KL9108 / KL9116 Standard Installation – Long 68.0–105.0
Easy Installation – Short 57.0–70.0
Easy Installation – Long 68.0–105.0
Phillips head hex
M4L4-6pcs
