Chapter 6. Windows Client Port Operation
71
Before you Begin
Discussion of the Windows Client OSD begins on page 74, but the first time
you run the program, you may want to make some display configuration
changes. To do so, Click the curved Arrow icon on the Control Panel at the
lower right of the remote display. a screen similar to the one below appears
There are three buttons: Config, Switch, and Exit. Their actions are described
in the table, below:
Button Action
Config Brings up the Graphics Configuration dialog box, which allows you
to set up the graphical environment. The Graphics Configuration
dialog box is discussed in the next section.
Switch Switches you to the Windows Client OSD. The Windows Client
OSD is discussed on page 74.
Exit Ends the program and closes the application.
