KL9108 / KL9116 User Manual
164
5. Slide the switch open and closed a couple of times to be sure that it is
properly aligned and operating smoothly. (See Opening the Console,
page 21 for opening and closing procedures.)
6. After determining that the switch is properly lined up and operating
correctly, finish up by fully tightening down the partially tightened front
attachment screws inserted in Step 3.
Dedicated Invocation Keys
Two dedicated keys (below) are provided on the keyboard module to make it
easy to invoke the OSD and the OSD Toolbar:
Note: These keys are toggles. Press once to invoke the feature, press again to
exit.
The KVM OSD Key invokes the OSD See The Local Console, page 31,
for details.
The KVM Hotkey Key opens the OSD Toolbar, which allows you to
control the KL9108 / KL9116 from within the captured port. See The OSD
Toolbar, page 85, for details.
