X1@ = Video/audio mute: 0 = no mutes 2 = audio mute
1 = video mute 3 = video and audio mute
X1# = Sync frequency xxx.xx (frequency in Hz [V] or kHz [H])
X1$ = Connection status 0 = no input connected 1 = input connected
X1% = RGB delay interval Delay in 1/2 second increments (10 maximum)
X1^ = Group # (for I/O grouping) 1 through 4 groups (0 = no group)
X1& = Inputs Total number of inputs for this switcher
X1* = Outputs Total number of outputs for this switcher
X1( = Part number 60-nnn-nn
X2) = Firmware version number to second decimal place (x.xx)
X2! = Verbose firmware version-description-upload date/time.
See the Query controller firmware version (verbose) command on page 105.
X2@ = Voltage Positive or negative voltage and magnitude
X2# = Temperature Degrees Fahrenheit
X2$ = Fan speed RPM
Command and Response Table for SIS Commands
Command Function
SIS Command
(Host to Unit)
Response
(Unit to Host)
Additional description
Create Ties
NOTES:
• Commands can be entered back-to-back in a string, with no spaces. For example: 1*1!02*02&03*03%4*8$.
• The quick multiple tie and tie input to all output commands activate all I/O switches simultaneously.
• The & tie command for RGB and the % tie command for video can be used interchangeably on the matrix switchers.
Tie input video and audio to output
X!
*
X@
! Out
X@
•In
X!
•All
]
Tie the input
X!
video and audio to
output
X@
.
Example:
1*3!
Out03•In01•All
]
Tie input 1 video and audio to output 3.
Tie input video (RGB) only to output
X!
*
X@
& Out
X@
•In
X!
•RGB
]
Audio breakaway.
Example (see last Note bullet,
above):
10*4&
Out04•In10•RGB
]
Tie input 10 RGB to output 4.
Tie input video only to output
X!
*
X@
% Out
X@
•In
X!
•Vid
]
Audio breakaway.
Example (see last Note bullet,
above):
7*5%
Out05•In07•Vid
]
Tie input 7 video to output 5.
Tie input audio only to output
X!
*
X@
$ Out
X@
•In
X!
•Aud
]
Audio breakaway.
Example:
24*4$
Out04•In24•Aud
]
Tie input 24 audio to output 4.
Quick multiple tie
E
+Q
X!
*
X@
!...
X!
*
X@
$
}
Qik
]
Example:
E
+Q3*4!3*5%3*6$
}
Qik
]
Tie input 3 video and audio to
output 4, tie input 3 video to output 5,
and tie input 3 audio to output 6.
Tie input to all outputs, video and
audio
X!
*! In
X!
•All
]
Example:
5*!
In05•All
]
Tie input 5 video and audio to all outputs.
Clear all ties
0*1
In00•All
]
Tie input to all outputs, RGB (video)
only
X!
*& In
X!
•RGB
]
Audio breakaway.
Example (see last Note bullet,
above):
8*&
In08•RGB
]
Tie input 8 RGB to all outputs.
Tie input to all outputs, video only
X!
*% In
X!
•Vid
]
Audio breakaway.
Example (see last Note bullet,
above):
10*%
In10•Vid
]
Tie input 10 video to all outputs.
Tie input to all outputs, audio only
X!
*$ In
X!
•Aud
]
Audio breakaway.
NOTE: X! = Input number (for tie) 00 – 16 or 32 (00 = untied)
X@ = Output number 01 – 16 or 32
CrossPoint and MAV Series Matrix Switchers • Programming Guide 95
