Command and Response Table for SIS Commands (continued)
Command Function
SIS Command
(Host to Unit)
Response
(Unit to Host)
Additional description
Resets
Reset global presets and names
E
ZG
}
Zpg
]
Clear all global presets and their names.
Reset one global preset
EX(
ZG
}
Zpg
X(]
Clear global preset
X(
.
Reset room map
E
ZR
}
Zpr
]
Clear all room definitions.
Reset individual room
EX1)
ZR
}
Zpr
X1)]
Delete room
X1)
.
Reset all room presets and names
E
ZP
}
Zpp
]
Clear all room presets and names.
Reset individual room preset and
name
EX1)
*
X(
ZP
}
Zpp
X1)
*
X(]
Clear an individual room preset and
name.
Reset RGB delays
E
ZD
}
Zpd
]
Reset all RGB delays to 0.0 seconds.
Reset audio input levels
E
ZA
}
Zpa
]
Reset all audio input levels (gain and
attenuation) to 0 dB.
Reset audio output levels
E
ZV
}
Zpv
]
Reset all audio output levels (volume)
to 100% (no attenuation).
Reset all mutes
E
ZZ
}
Zpz
]
Reset all audio outputs to unmuted.
Reset whole switcher
E
ZXXX
}
Zpx
]
Clear all ties and presets, reset all audio
gains to 0 dB, and reset volume to 100%.
Absolute reset, including IP settings
E
ZQQQ
}
Zpq
]
Similar to Reset whole switcher, plus
clear the IP address to 192.168.254.254
and subnet mask to 255.255.000.000.
Absolute reset, excluding IP settings
E
ZY
}
Zpy
]
Similar to Absolute reset, including
IP settings (
E
ZQQQ
}
), but excludes
the following IP settings: IP address,
subnet mask, gateway address,
unit name, DHCP setting, and port
mapping (telnet, web, and direct
address).
NOTE: X( = Global or room preset number 00 - 32, 10 maximum for a room preset (00 = current configuration for view only)
X1) = Room number (for room presets) 10 max. (Each can have up to 10 presets (X(s) assigned.)
CrossPoint and MAV Series Matrix Switchers • Programming Guide 104
