Rear Panel Views
All connectors for all switchers are on the rear panel. Figure 4 through figure 14, on the
following pages, show a representative sampling of all of the matrix switchers described in
this guide. See Rear Panel Connections, on page 19, for connecting cables to the rear
panel connectors.
ATTENTION:
• Use electrostatic discharge (ESD) precautions (be electrically grounded) when
making connections. Electrostatic discharge can damage equipment, even if you
cannot feel, see, or hear it.
• Remove system power before making all connections.
a Video Input BNC connectors — See page 19 (CrossPoint) or page 21 (MAV).
b Video Output BNC connectors — See page 19 (CrossPoint) or page 21 (MAV).
c Sync termination switches (CrossPoint) — See page 23.
d Audio Input captive screw connections — See page 24.
e Audio Output captive screw connections — See page 24.
f Audio Input RCA connections — See page 25.
g Audio Output RCA connections — See page 25.
h RS-232/422 DB-9 connector — See page 26.
i Ethernet (LAN) RJ-45 port — See page 27.
j Reset button — See page 28.
k Ext(ernal) Sync BNC connector — See page 28.
l Power IEC connector — See page 29.
CrossPoint and MAV Series Matrix Switchers • Installation 13
