Xerox WorkCentre 4118 and FaxCentre 2218 System Administration Guide Page 4-9
Print Driver Installation for Networked Printers
Windows XP (Internet Printing Protocol)
NOTE: Windows XP supports printing via IPP as standard when TCP/IP is installed on a
Windows XP Workstation.
Use the Add Printer Wizard to add the WorkCentre 4118 / FaxCentre 2218 to the network.
¾ Select [Start] and then select [Printers and Faxes].
Double-click on the [Add Printer] icon to display the Add Printer Wizard.
¾ Verify that the [Network Printer] is selected and click [Next].
The [Locate Your Printer] screen displays.
¾ Select [Connect to a printer on the Internet or on a home or office network].
The [Specify a Printer] screen displays.
In the URL field enter the IP address or hostname of the printer in the following format:
http://aaa.bbb.ccc.ddd or http://printer-host-name, where aaa.bbb.ccc.ddd is the IP
address of the WorkCentre 4118 / FaxCentre 2218 and printer-host-name is the host name
of the WorkCentre 4118 / FaxCentre 2218 registered with a DNS server.
The Add Printer Wizard will then ask if you wish to install a local driver for this printer. You
should click [OK] to install the driver.
¾ Insert the CD containing the WorkCentre 4118 / FaxCentre 2218 drivers and select [Have
Disk].
Browse to the required Windows XP driver on the CD and select [OK].
NOTE: The driver will be found in the Drivers>Print folder on the CD in the appropriate PCL
or PostScript
®
3
TM
folder. The driver is identified by the file extension .inf.
Select [Next], and select [Next] again and the WorkCentre 4118 / FaxCentre 2218 driver
will be loaded onto the workstation.
A dialog box displays with a message regarding the printing of a test page.
Select [Finish] to accept the Yes choice.
¾ Continue with Test Print, see Test Print 8-16.
1
2
3
4
5
