Xerox FaxCentre 2218 User Guide Page 4-15
Fax
Polling
z Polling is used
to retrieve
documents from
remote fax
machines.
Remote fax
machines can
also poll your
machine.
TX Poll Use to store a document
on the machine ready to
be polled by a remote fax
machine.
¾ Press [Menu/Exit].
¾ Using the Navigation Keys select [Fax Features]
and press [Enter].
¾ Select [Polling] and press [Enter].
¾ Select [TX Poll] and press [Enter].
¾ Enter a 4 digit Poll Code and press [Enter].
¾ To store the originals in the Bulletin Board select
[On]. If the Bulletin Board is not required, select
[Off].
¾ Press [Start]. The originals are scanned into
memory ready to be polled.
Delay RX
Poll
Use to retrieve a
document from a remote
fax machine at a specified
time.
¾ Press [Menu/Exit].
¾ Using the Navigation Keys select [Fax Features]
and press [Enter].
¾ Select [Polling] and press [Enter].
¾ Select [Delay RX Poll] and press [Enter].
¾ Enter the fax number using the Numeric Keypad a
Phonebook entry or One Touch Key, and press
[Enter].
¾ The display shows the current time, enter a start
time for the remote fax machine to be polled.
Press [Enter] when the correct time displays.
If you set a time earlier than the current time, the
job will be sent at that time the following day.
¾ Enter a 4 digit Poll Code and press [Enter].
The machine will poll the remote machine at the
specified time.
Batch TX
z Use to send
faxes that are
going to the
same location, in
one batch.
On Activates the Batch TX
feature.
¾ Press [Menu/Exit].
¾ Using the Navigation Keys select [Fax Features]
and press [Enter].
¾ Use the Navigation Keys to select [Batch TX] and
press [Enter].
¾ Select [On] and press [Enter]. Enter a Batch
Interval between 0 - 99 and press [Enter].
Off Deactivates the Batch TX
feature.
01_UG.book Page 15 Wednesday, March 7, 2007 3:00 PM
