Xerox WorkCentre 4118 and FaxCentre 2218 System Administration Guide Page 5-3
AppleTalk
AppleTalk Installation
Installation Procedure
There are three stages required to install the WorkCentre 4118 / FaxCentre 2218 on an
Appletalk network:
¾ Network Communication Setup
This requires the WorkCentre 4118 / FaxCentre 2218 to be setup for
Appletalk.
¾ Print Driver Installation
¾ Test Print
A test print should be submitted to ensure the WorkCentre 4118 / FaxCentre
2218 has been installed and configured correctly.
Network Communication Setup
This procedure is used to setup the network communication parameters of the WorkCentre
4118 / FaxCentre 2218.
At the WorkCentre 4118 / FaxCentre 2218, perform these steps:
HINT: Xerox CentreWare Internet Services can also be used to configure the WorkCentre
4118 / FaxCentre 2218, refer to the CentreWare Internet Services chapter for instructions.
¾ Connect the device to the network outlet or cable.
1
2
¾ Press the [Machine Status]
button.
Machine Setup
Fax Setup
