Page 4-36 Xerox FaxCentre 2218 User Guide
Fax
MSG Confirm On Sets the machine to print a transmission report for
every fax transmission.
Off De-activates printing a transmission report.
On-Err Sets the machine to print a transmission report only if
an error has occurred.
Auto Reduction On Use to activate the machine performing an automatic
reduction for over-sized fax jobs.
Off Use to de-activate the automatic reduction. Over-
sized jobs are printed on two pages.
Prefix Dial Up to 5 digits The number entered will be added to the beginning of
each fax sent.
Auto Report On Use to enable a report listing details about the
previous 50 communication operations.
Off
ECM Mode On Use to switch on ECM for all transmissions.
Transmission time may be increased when ECM is
enabled.
Off Use to switch off ECM.
Redials [0 - 13] Use to set the number of redial attempts.
Ring to Answer [1 - 7] Use to set the number of rings before answering. This
feature is disabled when Receive Mode is set to Ans/
Fax.
Redial Term [1 - 15] Use to set the number of minutes between redial
attempts.
Ringer Off Use to set the ringer volume.
Low
Med
High
Junk Fax Setup On Use to restrict receipt of junk mail by not allowing
faxes to be received from remote machines
registered on your machine.
Off
01_UG.book Page 36 Wednesday, March 7, 2007 3:00 PM
