Operator Guide Safety notes
DocuTech/DocuPrint 75/90 and DocuPrint 75 MX 2-9
Additional queries
Please contact the Xerox Europe Technical Centre or your
authorized Xerox representative if you have any queries
regarding the information provided in this document.
Electrical safety
Attention to the following requirements ensures the safe
operation of your equipment.
Printer
USA/Canada The DocuTech/DocuPrint 75 printer requires a 115V AC outlet,
dedicated 20 Amp, 3-wire circuit. The DocuTech/DocuPrint 90
printer requires a 208V AC outlet, dedicated 20 Amp, 3-wire
circuit.
Europe The printer requires a 220-240V outlet, dedicated 13 Amp or 10
Amp circuit. The equipment must be connected to a grounded
mains outlet.
Printer cautions
Ensure that the power connection for your printer satisfies these
requirements.
• The power receptacle (NEMA#5-20R) for the printer must
meet the requirements stated on the data plate on the rear of
the printer.
• The socket outlet shall be installed near the equipment within
reach of the 10 ft. (3 m) cable and shall be easily accessible.
• Use the power cable that is supplied with your printer and
controller. Do not use an extension cord, or remove or modify
the power cord plug.
• Plug the power cable directly into a correctly grounded
electrical outlet. If you are not sure whether or not an outlet is
correctly grounded, consult a qualified electrician.
•Do not use an adapter to connect the printer to an electrical
outlet that lacks a ground connection terminal.
