DocuTech/DocuPrint 75/90 and DocuPrint 75 MX 6-1
6. Problem solving
This chapter will assist you in avoiding problems and solving
those that may occur. It also provides information on how to
contact the Welcome Center.
Avoiding the problems
A variety of situations can affect the quality of the printer output.
For optimal performance, follow these guidelines:
• Do not locate the printer in direct sunlight or near a heat
source such as a radiator.
• Avoid sudden changes in the environment surrounding the
printer. When a change occurs, allow the printer at least two
hours to adjust to its new environment, depending on the
extent of the change.
• Always set the Edge Guides in the trays to the size of the
stock in the tray. Otherwise, you may experience jams.
• Avoid dusty environments. Dust in the printer can cause
paper handling problems. Dust in either the printer or the
controller can cause electrical problems.
• Avoid placing routing cables where they may be stepped on,
damaged, or come in contact with liquids or sharp edges.
• Avoid placing routing cables where they could cause tripping
hazards. This is especially true when the controller is in the
standard location on the floor.
• Locate the equipment in a properly lighted area to facilitate
operation and service.
