Safety notes Operator Guide
2-10 DocuTech/DocuPrint 75/90 and DocuPrint 75 MX
• The power cord is the disconnect device for this printer.
•Do not override or disable electrical or mechanical interlocks.
•Do not push objects into slots or openings on the printer.
Electrical shock or fire may result.
•Do not obstruct ventilation openings. These openings
prevent overheating of the printer.
Controller
USA/Canada The controller requires a dedicated 115V AC 20 Amp grounded
receptacle.
Europe The controller requires a 220-240V, 13 or 10 Amp grounded
receptacle.
Controller cautions
Follow all safety cautions, warnings, and instructions marked on
the controller.
• Ensure that the voltages and frequency rating of the power
receptacle match the electrical rating label on the equipment.
• Do not make electrical or mechanical modifications to the
equipment.
• Use the power cable that is supplied with your controller. Do
not use an extension cord, or remove or modify the power
cord plug. If the plug must be changed, a qualified electrician
must install the plug correctly on the power cord.
• Plug the power cable directly into a correctly grounded
electrical outlet or into the power strip that is connected to
this outlet. If you are not sure whether or not the outlet is
correctly grounded, consult a qualified electrician.
•Do not use an adapter to connect the controller to an
electrical outlet that lacks a ground connection terminal.
• The power switch functions as a standby type of device only.
The power cord serves as the primary disconnect device for
the system.
•Do not push objects into slots or openings on the equipment.
Electrical shock or fire may result.
