Operator Guide Paper and other stock
DocuTech/DocuPrint 75/90 and DocuPrint 75 MX 5-11
Recommendations for handling, loading, and storing paper
Give your paper the proper handling, loading, and storage.
Labels Self-adhesive
labels for
envelopes and
packaging
• Do not duplex.
• Feed labels into the printer
LEF only.
Labels pose a special problem
because, depending on the
number of labels per sheet,
there is an opportunity for the
label to separate from the
backing while inside the
printer.
• Load face-up in Trays 1-4.
• Load face-down in Trays 5-6.
GBC stock
(Sameceda)
Plastic comb or
strap binding via
slotted holes or
rectangles at
frequent intervals
along the long
edge (the bind
edge)
• Load with slotted holes
inboard; for example, load
SEF when the holes are down
the long edge.
• Loading with holes on the
lead-edge (LEF) or the trail-
edge (LEF) is not supported,
but may work well for some
stock depending upon the size
and number of the holes and
how they affect the sensors in
the printer; therefore, if you
intend to use LEF you should
run a sample of the stock to
confirm its acceptability before
running the job.
Table 5-6. Recommendations for loading special stock
Stock Type Common Use Recommendation
