Maintenance Operator Guide
4-4 DocuTech/DocuPrint 75/90 and DocuPrint 75 MX
Power-off procedures
You can power off only the printer and allow the controller to
keep on processing jobs, or you can power off both the printer
and the controller.
Printer power-off
When the printer power is off, the power-on/power-off indicator
does not emit light, it is colorless.
Under normal operating conditions the printer should be
powered off using the DocuSP Print Services on the controller,
rather than by pressing the printer on/off switch.
Printer power-off from the controller
You can power-off the printer from two different DocuSP Print
Services menus and still allow the controller to continue
processing jobs.
Preferred Method To power off the printer:
1. Open the System or the Printer menu.
2. Select the [Printer Off] option.
3. Confirm that the power-on/power-off indicator is colorless.
Printer Power-Off Using The Printer Switch
It is not obvious from the position of the switch whether the
printer is on or off. View the power-on/power-off indicator to
determine the printer state: green for on, colorless for off.
If you need to shut the printer down immediately, and this is an
emergency, use the red button described in the next section. If
this is not an emergency, use the procedure given below.
Alternate Method To power-off the printer:
1. Locate the white on/off switch.
2. Press the switch to the left or front of the printer as shown in
Figure 4-4.
3. Confirm that the power-on/power-off indicator is colorless.
