Operator Guide Paper and other stock
DocuTech/DocuPrint 75/90 and DocuPrint 75 MX 5-9
The printer performance for new and recycled 8.5 x 11 inches
(216 to 279 mm) or A4 paper for various weights is shown in
Table 5-5.
Recommendations for loading special stock
The common uses and the special requirements for the variety of
stock types that the printer can accommodate are shown in Table
5-6.
Table 5-5. Printer performance for new and recycled plain paper
Paper Weight
Throughput Material 8.5 x 11 in. or A4 Rating Note
Less than 16 lb or 61 gsm x
Between 16-20 lb or 61-75 gsm o
Between 20-32 lb or 75-120 gsm l
Between 32-110 (index) lb or 120-203 gsm ul
Greater than 110 (index) lb or 203 gsm x
Table 5-6. Recommendations for loading special stock
Stock Type Common Use Recommendation
Hole-punched
3 or 4 holes
NOTE: Cannot
Dual Staple due to
hardware
limitations. Dual
stapling drilled
stock will cause
jams in the
finisher.
Ringed binders • Use long-edge feed paper for
best imaging speed.
• Load with holes on the left in
Trays 5-6.
• Load with holes on the right in
Trays 1-4.
Perforated Pages for partial
removal, such as
order forms and
receipts
• Where possible, load with the
perforations parallel to the
feed direction.
