Filter
Top Products
12-EN
Displaying Radio Text
Text messages from a radio station can be displayed.
Press TITLE while receiving FM in the radio mode to
select the Radio Text display.
The display will change every time the button is pressed.
CDA-9855R
CDA-9853R
The display shows “WAITING” for a few seconds, then starts
scrolling the text message.
*
1
TITLE can be input or erased.
*
2
If there is no receivable text message or the unit cannot receive a
text message properly, the display shows “NO TEXT.”
*
3
Only when an external Amplifier Link compatible amplifier is
connected. For details, refer to “Displaying the External Amplifier
Information” (page 27).
Priority PTY (Programme Type)
This function allows presetting of a programme type such as music
category, news, etc. You can listen to a programme in the preset
programme type as the unit automatically gives priority to the preset
programme type when it begins broadcasting, and interrupts the
programme you are currently listening. This feature is functional
when your unit is set to a mode other than the LW and MW.
1
Press FUNC. to activate the audio function mode.
Source select mode → Audio function mode → Preset mode
→ Source operation mode* → Source select mode
* CDA-9855R only
2
Select P. PTY by sliding your finger on the
GlideTouch bar to the left or right. Press the
GlideTouch bar under P.PTY.
The initial setting is NEWS.
• If no operation is performed within 10 seconds after activating the
PRIORITY PTY mode, the PRIORITY PTY mode will be
automatically cancelled.
3
Press g or f within 10 seconds while NEWS
is being displayed to choose a desired programme
type.
4
Within 10 seconds, select P. PTY mode by sliding
your finger on the GlideTouch bar to the left or
right. Press the GlideTouch bar under P.PTY.
The PRIORITY PTY mode will activate.
To change the programme category, perform the steps 1
to 3. To disable the PRIORITY PTY mode, press and hold
P.PTY on the GlideTouch bar for at least 2 seconds.
• In the PRIORITY PTY function, unlike in the TA function, the
volume does not increase during operation.
PRESET No./FREQUENCY
PS (Programme Service Name)
PTY (Programme Type)
PRESET No./FREQUENCY
TITLE*
1
→
PRESET No./FREQUENCY
Radio Text*
2
PRESET No./FREQUENCY
PS (Programme Service Name)
EXTERNAL AMPLIFIER
INFORMATION*
3
→→
→
PRESET No./FREQUENCY PRESET No./FREQUENCY
Sound dependent display
→→
PRESET No./FREQUENCY
PS (Programme Service Name)
PTY (Programme Type)
PS (Programme Service Name)
FREQUENCY
PRESET No.
TITLE*
1
FREQUENCY
PRESET No.
→
Radio Text*
2
FREQUENCY
PRESET No.
FREQUENCY
EXTERNAL AMPLIFIER
INFORMATION*
3
PRESET No.
→→
→
PS (Programme Service Name)
FREQUENCY
PRESET No.