Filter
Top Products
11-EN
BAND/TEL.
SOURCE/
PWR
gg
gg
g
ff
ff
f
NOTES
• The controls on the CVA-1004 for XM Receiver
operation are operative only when an XM Receiver is
connected.
• The XM1, XM2 or XM3 band illuminates when in XM
mode.
1 Press SOURCE/PWR to select XM mode.
2 Press BAND/TEL. to select XM1, XM2 or XM3.
Each press changes the band:
→ XM1 → XM2 → XM3
3 Press g or f to select the desired channel.
Holding g or f will change channels
continuously.
Checking the XM Radio ID Number
You need to provide XM with the unique XM
Radio ID number for your XM Radio Receiver in
order to subscribe to XM's programming.
This number is an 8 character alphanumeric
number that is printed on a label directly on the
XM Receiver.
It can also be displayed on the screen of the CVA-
1004 in the following way.
1 While receiving XM1/XM2/XM3, press g or
f to select channel “0.”
2 The unit alternately displays “RADIO ID” and the
number.
3 To cancel the ID number display, set the channel
to other than “0.”
NOTES
• You cannot use “O,” “S,”“ I,” or “F” for the ID
Number.
• You can check your ID number printed on the label on
the package of your XM Satellite Radio Receiver
(TUA-T021XM).
• Perform this operation after selecting “CH No.” in
“Changing the Channel Select Method” (page 12).
Receiving the XM Channels with
the XM Receiver (Optional)
XM Satellite Radio* is the next generation of
audio entertainment, with up to 100 brand-new
digital channels. For a small monthly fee,
subscribers can hear crystal-clear music, sports,
news and talk, coast-to-coast via satellite. For
more information, visit XM’s website at
www.xmradio.com or call 1-800-852-9696.
An optional XM Satellite Radio Receiver (TUA-
T021XM) with an optional XM Antenna may be
connected to the CVA-1004. With an XM Receiver
connected to the Ai-NET input of the CVA-1004,
the XM Receiver will be controllable from the
CVA-1004.
* XM and its corresponding logos are trademarks
of XM Satellite Radio Inc.
XM Radio Operation (Optional)
Example of XM mode Screen
Volume Level
Current Time
Channel
Name
Channel
Number
Selected Source
Preset button
number for
the stored
station
The current
setting status
Category Name