Alpine DVA-7996 Car Stereo System User Manual


 
20-EN
CD Player Operation
Insert a disc with the label side facing up.
2 Insert a disc with the label side facing up.
The disc will be pulled into the unit automatically. The
movable display will close and playback will begin.
When a disc is already inserted, press the SOURCE
button to switch to the CD (DISC) mode.
The mode will change every time the button is pressed.
3 To pause playback, press the button.
Pressing the button again will resume playback.
4 To eject the disc, press the button.
NOTES
Do not touch the CD while it is loading or ejecting, as a
malfunction may result.
If the CD does not eject, press and hold the button for more
than 3 seconds while the movable display is still open.
Some discs require more time before playback starts. This is
normal
Opening and Closing the Movable
display
1 Press the button.
The movable display will open.
To close the movable display, press the button again.
The movable display will close.
NOTES
Do not apply shock to the movable display when it is open as
it may result in malfunction of the unit.
The display may be dim during low temperatures and
immediately after turning on the power. The brightness will
return to normal as time elapses.
The display will stop at the set angle when closing.
CAUTION
Keep hands (or any other object) away from the display while it
is opening or closing to avoid damage or injury. The back of the
movable display will get very warm under normal operating
conditions. This is not a malfunction. Do not touch.
Playback
1 Press the button.
The movable display will open.
Music Sensor (Skip)
1 Momentarily press the DN button once during CD
play to return to the beginning of the current track. If
you wish to access the beginning of a track further
back, repeatedly press until you reach the desired
track.
Press the UP button once to advance to the
beginning of the next track. If you wish to access the
beginning of a track further ahead, press repeatedly
until the desired track is reached.
NOTE
The music sensor feature is functional in the play or pause
mode.
Fast Forward and Backward
1 Press and hold the DN or UP button to quickly
move backward or forward until you reach the desired
section of the track.
SOURCE
DN UP
REPEATF
M.I.X.
SCAN
Select buttons (1 through 6)
TUNER CD (DISC) CD CHANGER
(
Only when the CD changer is connected)