Filter
Top Products
24-EN
M.I.X. (Random Play)
1 Press the M.I.X. button in the play or pause mode.
The files on the disc will be played back in a random
sequence.
To cancel M.I.X. play, press the M.I.X. button again to
turn off the M.I.X.
NOTES
• When you select “FOLDER” and set to M.I.X. in the “Setting
the Range of MP3 File Selection” section on page 25, the
Files in the Folder are played back in random sequence. After
all the files have been played back, play does not shift to the
next Folder.
• In case an MP3 compatible CD changer is connected:
In CD changer mode, press the “F” button to illuminate the
“FUNC” indicator and go to step 1 within 5 seconds.
Scanning Programs
1 Press the SCAN button to activate the Scan mode.
The first 10 seconds of each file will be played back in
succession.
To stop scanning, press the SCAN button and
deactivate the Scan mode.
NOTES
• When you select “FOLDER” in the “Setting the Range of
MP3 File Selection” section on page 25, the first 10 seconds
of each File in the Folder will be played back.
• If a CD changer applicable to MP3 is connected:
In CD changer mode, press the “F” button to illuminate the
“FUNC” indicator and go to step 1 within 5 seconds.
Selecting Folders
1 Press the FOLDER DN or FOLDER UP button to
select the folder.
NOTE
If a CD changer applicable to MP3 is connected:
In CD changer mode, press the “F” button to illuminate the
“FUNC” indicator and go to step 1 within 5 seconds.
File Search
You can locate all the files on a disc and play them.
1 Press the FILE SEARCH button during playback.
The unit switches to File Search mode.
2 Turn the Rotary encoder to select the desired file.
3 Press the Rotary encoder to execute the setting.
The selected file starts to play.
NOTES
• During search, press the FILE SEARCH button to cancel the
File Search mode.
• If a CD changer applicable to MP3 is connected:
In CD changer mode, press the “F” button to illuminate the
“FUNC” indicator and go to step 1 within 5 seconds.
Repeat Play
1 Press the REPEAT button to play back repeatedly the
file being played.
The file will be played repeatedly.
Press the REPEAT button again and select OFF
to deactivate the repeat play.
NOTES
• If a CD changer applicable to MP3 is connected and the RPT
ALL mode is selected, the unit repeatedly plays back all files
on the selected disc.
• When you select “FOLDER” and set to RPT ALL in the
“Setting the Range of MP3 File Selection” section on page
25, the Files will be repeatedly played back.
• If a CD changer applicable to MP3 is connected:
In CD changer mode, press the “F” button to illuminate the
“FUNC” indicator and go to step 1 within 5 seconds.
DN UP
BAND
SETUP
SCAN
FOLDER DN
FOLDER UP
FILE SEARCH
REPEAT
M.I.X.
MP3 Operation
Rotary encoder
RPT RPT ALL (off)