Filter
Top Products
28-EN
Storing XM Channel Presets
1 Press the BAND button to select the desired band
(XM1 or XM2) you want to store.
2 After tuning in the desired channel, press and hold any
one of the Preset buttons (1 through 6) that you want
to store the station on for at least 2 seconds. The
selected station is stored.
3 Repeat the procedure to store up to 5 other channels
onto the same band.
To use this procedure for other bands, simply select
the band desired and repeat the procedure.
A total of 12 channels can be stored in the preset
memory (6 channels for each band; XM1 and XM2).
NOTE
If you store a channel in a preset memory which already has a
station, the current channel will be cleared and replaced with the
new one.
Receiving Stored XM Channels
1 Press the BAND button to select the desired band
(XM1 or XM2).
2 Press the channel Preset button that has your desired
satellite channel in memory.
Changing the Display
Text information, such as the channel name, artist
name/feature, and song/program title, is available with
each XM channel. The unit can display this text
information as explained below.
1 In XM mode, press the TITLE button.
Each time you press this button, the display changes
as shown below.
NOTES
• When the “Scroll Setting” (refer to page 17) is set to “SCR
AUTO”, the display scrolls.
When the Scroll Setting is set to “SCR MANUAL”, the display
scrolls only when you operate the unit (POWER ON, BAND,
etc., are displayed.)
Press and hold the TITLE button for more than 3 seconds to
scroll the display again.
• “Channel Number” and “Clock” displays do not scroll.
• Depending on the model, the display may differ from the one
shown above.
Category Search
Category Search functionality allows you to search for a
specific channel by the category of programming it
offers, or to surf within a given category.
1 In XM mode, press the CAT button to display the
category of the channel that is currently selected for 13
seconds.
2 While the category is displayed, press the
DN or UP button to select a different category
(or leave it to stay with the same category.)
3 Within 13 seconds of selecting the category, press the
CAT button again to select the next channel within that
category. Repeatedly press the CAT button within 13
seconds to select additional channels within that
category.
When tuned in, the category is displayed for 13
seconds, then the display returns to normal mode.
NOTE
If you cannot find your desired category, the display shows
“
------
” for 2 seconds automatically.
XM Radio Operation
DN UP
BANDCAT
TITLE
Preset buttons (1 through 6)
FM1 FM2 XM1 XM2 AM
Channel Number
display
Channel Name
display
Artist Name
display
Song Title
display
CLOCK
display