Filter
Top Products
32-EN
DVD/Video CD Operation
Searching directly
by chapter or track number
Use this function to easily move to the
beginnings of the chapters or tracks on the disc.
1 Except during the stop mode, input the number
of the chapter or track you want to play using the
number keys (“0” to “9”).
(The monitor display when chapter 12 is input.)
2 Press the ENTER button.
Playback starts from the selected chapter or
track.
NOTES
• This function cannot be used on discs on which no
chapter numbers are recorded.
• If the chapter number is a 3-digit number, playback
starts automatically even if the ENTER button is not
pressed at step 2.
• Press the DEL. button to delete the last digit in the
chapter/track number. Press and hold the DEL.
button for at least 2 seconds to clear “Chapter” and
“Track” numbers.
• Press the RTN button to cancel the chapter/track
search mode and resume normal playback.
• With video discs containing playback control (PBC),
the “searching directly by track number” function is
not available while PBC is ON. Press the MENU
button to turn the PBC function off.
• If the chapter/track number is known, you can search
directly using the number keys (“0” to “9”) during
playback mode, PRE-STOP mode, etc.
DVD
Video CD
Switching the angle
On DVDs in which scenes have been filmed from
multiple angles, the angle can be switched during
playback.
1 During playback, press and hold the ANGLE
button.
The angle switches between the angles recorded
on the disc each time the button is pressed.
NOTES
• Some time may be required for the angle to change.
• Depending on the disc, the angle may switch in one
of two ways.
-Seamless: The angle switches smoothly.
-Non-seamless: When the angle is switched, a still
picture is displayed first, after which the angle
switches.
• This operation cannot be performed using the
ANGLE
button on the main unit.
DVD
Switching the audio tracks
DVDs can have up to 8 different audio tracks.
These alternate tracks can be switched during
playback.
1 During playback, press and hold the AUDIO
button.
The sound switches between the alternate audio
tracks recorded on the disc each time the button
is pressed.
NOTES
• The alternate track selected becomes the default
setting every time the power is turned on or the disc
is replaced. If the disc does not include that track, the
disc’s default language is selected instead.
• Not all discs will allow changing the alternate audio
tracks during playback. In these cases, select audio
tracks from the DVDs menu.
• There may be a delay before the selected alternate
track begins to play.
• Video CDs with multiplex audio
1 During playback, press and hold the AUDIO
button.
The left and right channels will be output as
shown in the figure below, each time the button
is pressed.
LL RR LR
DVD
Video CD
0 ~ 9
ENTER
ANGLE
SUB T.
AUDIO
DISP/
TITLE
MENU
Joystick