Filter
Top Products
6-EN
Battery Replacement
Applicable battery: Use two “AAA” sized dry batteries or
equivalent.
1 Opening the battery cover.
Push on the cover and slide it as indicated by the
arrows then the cover will be removed.
2 Replacing the battery.
Put the batteries in the case observing the polarities as
illustrated.
3 Closing the cover.
Push the cover in the arrow direction until a click is
heard.
Point the remote control transmitter at the remote
control sensor.
Notes on Using Remote Control
• Point the remote control at the remote sensor within about
2 meter.
• It may not be possible to operate the remote control unit if
the remote control sensor is exposed to direct sunlight.
• The remote control is a small, light weight precision
device. To avoid damage, short battery life, operational
errors and poor button response, observe the following.
- Do not apply any shock.
- Do not put in a trouser pocket.
- Keep away from food, moisture and dirt.
- Do not place in direct sunshine.
Remote control sensor
−
+
+
−
DO NOT OPERATE ANY FUNCTION THAT TAKES YOUR
ATTENTION AWAY FROM SAFELY DRIVING YOUR
VEHICLE.
Any function that requires your prolonged attention should
only be performed after coming to a complete stop. Always
stop the vehicle in a safe location before performing these
functions. Failure to do so may result in an accident.
Warning