Filter
Top Products
English
162
Other Useful
Features
When the character for the first position has
been selected, press the rotary encoder. The
first character has been memorized at the first
position. See "Notes" on next page.
4
Repeat steps 3 and 4 to enter the rest of
characters. You can input up to 12 characters
for titling one radio station (or CD).
5
3
Characters are displayed at the bottom menu.
Rotate the rotary encoder and select the
desired character for the first position.
To change between upper case, lower case,
numeral and symbol, press the 3 (A/1) button.
Each press changes the bottom menu.
When titling has been completed, press the 6
(WRITE) button to store the title in memory.
The display changes to the Radio mode.
To title other stations (or CDs), repeat this
procedure. You can title up to 120 (max.) stations
and CDs combined. The input titles will be
displayed when a station (or CD) titled is selected.
Notes: • If the memory capacity for radio
station titles is full and if you attempt
to title a new station, the oldest title
will be erased to make room for the
new one. To delete a title, select the
title you want to delete, then select
"SPC" (space) and press the 6
(WRITE) button.
• When the 1 (; BACK) or 2 (NEXT -)
button is pressed, the cursor moves to
the left or right on the input titles.
• If an incorrect character has been
entered, select "SPC" (space) and
input a new character or press the 4
(DELETE) button to delete the
previous character. Press the 5
(CLEAR) button while inputting the
titles to erase all the characters you
have input.
• Pressing the FUNC (RETURN)
button in the Title Input mode
changes the display back to the
previous display.
6
WRITE