Filter
Top Products
English
208
Other Useful
Features
2
1
3
1
Rotate the rotary encoder while the DISPLAY
mode screen is displayed and select "COLOR"
to activate the color adjustment mode. The
Function Guide is displayed.
Press the 1 (; THIN) or 3 (THICK :) button
to make the color of the picture brighter or
darker respectively to get your desired color.
You can adjust the color between MIN (–15)
and MAX (+15). When it reaches the minimum
or maximum point, the display shows "MIN" or
"MAX" respectively. To quickly set to the center
position, press the 2 (±0) button.
2
THIN ± 0
THICK
When the adjustment has been completed,
press the FUNC (RETURN) button. The display
returns to the main menu screen.
3
RETURN
Adjusting Color of
Picture
Color adjustment can be made only in the
navigation, DVD, AUX1 and AUX2 modes.
Tint adjustment cannot be made if a Navigation
system with the RGB feature is connected.
Note: After carrying out the steps 1 to 3 of "To
switch to the display mode screen or to
the picture mode" explained on page
202, perform the operation described
below.