Filter
Top Products
English
72
CD Player/Changer
(Optional) Operation
Multi-Changer Selection
Alpine's Ai-NET system will support up to 6 CD
Changers. When operating two or more
changers, the KCA-400C (Multi-Changer
Switching device) must be used. If you use 1
Switching device, you can connect up to 4 CD
Changers. If you use 2 Switching devices, you
can connect up to 6 CD Changers.
Press the SOURCE button to display the main
menu.
1
Rotate the rotary encoder to select changer 1-4
(when one KCA-400C is connected) or changer
1-6(when two KCA-400Cs are connected).
Then press the rotary encoder.
The display shows the selected CD changer
mode screen.
Note: When one KCA-400C is connected to
the changer, "Changer 1-4" is displayed
in the main menu. When two KCA-
400Cs are connected to the changer,
"Changer 1-6" is displayed in the main
menu.
2
2
13
3
In Changer mode, you can select the next
changer (connected changers only) by pressing
the BAND button on the unit or on the remote.
Note: You cannot operate this function in the
title display or Title inputting display.
4
To operate the selected changer, see "CD
Player/Changer Operation" section.