Filter
Top Products
11-EN
01GB05IVAW205R.fm
ALPINE IVA-W205R 68-08564Z42-A (EN)
How to view the Display
The display unit is equipped with tactile feedback (PULSETOUCH).
• Be sure to touch the button lightly with the pad of your finger on the
display to protect the display.
• If you touch a button and there is no reaction, remove your finger
from the display, and try again.
Here is an example explanation for the Radio mode display on how to
recall a source.
1
Touch [SOURCE] on the main screen.
The SOURCE selection screen is displayed.
Display example for SOURCE selection screen
Changes to main source screen.
Displays source modes that can be selected.
(The kind of source modes that are displayed varies
depending on connection and setting.)
Changes to the Rear selection screen when “Setting the
Picture Output” (page 36) is set to ON.
Returns to the previous screen.
• When the source icon is not displayed on SOURCE selection screen,
it is displayed on the next page.
Touching [ ] on the SOURCE selection screen will display the next
page; touching [ ] will return to the previous page.
2
Touch [RADIO].
The screen changes to the Radio mode main display.
Display example for Radio (MW) main screen
Changes to SETUP selection screen.
Changes to VISUAL selection screen.
Displays the source name, such as radio band, etc.,
that is selected.
Changes to the SOURCE selection screen (to Step 1
screen).
Working state indicator.
Displays volume level.
Function Guide:
The function guide display varies depending on each
source.
The contents of the function guide change by touching
[P1/2]* or [P2/2]* on the function guide, and many other
operations can be performed.
Displays time.
* Display may vary depending on the connected devices.
3
Touch [SOURCE] on the main source screen to
change to another source screen, and select the
desired source from the SOURCE selection screen.
• The screen can be changed to the VISUAL selection screen by
touching [VISUAL].
Set to VISUAL in “Setting the VISUAL Soft Button” (page 37).
• The screen can be changed to the SETUP selection screen by
touching [SETUP].
• After 5 seconds of each operation in the visual mode, the screen
changes to the visual screen only.
To display the main source screen, touch the display panel, then
touch [CONTROL] on the screen. The SOURCE selection screen
appears by touching [SOURCE] on the changed main source screen.
Touchscreen operation
What is the tactile feedback (PULSETOUCH)?
When you touch a button graphic in the display, you will feel a
mild vibration and click on the display panel surface. This
feedback enables you to easily identify action areas in the
display.
About the button descriptions used in this Owner’s Manual
• Soft buttons, ones found in the display, are shown in bold
enclosed in brackets, [ ] (e.g. [SOURCE]).
• Whenever a soft button and a head unit button have the same
function, the explanations in this Owner’s Manual will describe
the function of the soft button.
Recalling the Source
68-08564Z42-A_F.book Page 11 Wednesday, January 24, 2007 2:26 PM