Filter
Top Products
29-EN
01GB05IVAW205R.fm
ALPINE IVA-W205R 68-08564Z42-A (EN)
DVD Setup Operation
The DVD Setup operation can be carried out after removing the
disc from the unit.
1
Touch [SETUP] on the main source screen.
The SETUP selection screen is displayed.
2
Touch [SOURCE].
The SOURCE SETUP screen appears.
3
Touch [] of DVD SETUP.
The DVD setup screen appears.
4
Touch [] or [], etc., of the desired item to change
its setting.
Setting items:
MENU LANGUAGE / AUDIO LANGUAGE / SUBT. LANGUAGE /
COUNTRY CODE / PARENTAL / DIGITAL OUT MODE /
DOWNMIX MODE / TV SCREEN / BONUS CODE /
DVD-A SETUP / FILE PLAY MODE / PBC
Display example for DVD setup screen
Touch [] or [] to set a desired language.
Touch [CODE] to display the numeric keypad input
screen.
Touch [] or [] to scroll a setting item list by one line.
Touch and slide up or down to scroll the list backwards
or forwards.
The numeric keypad input screen closes when the area
is touched while displayed.
Numeric keypad input screen
The numeric keypad is used if you want to play back in
a language other than that displayed, or to input your
parental lock password, etc.
5
Touch [RETURN] to return to the previous screen.
Touch and hold [RETURN] for at least 2 seconds to return to
the main source screen that was displayed before the setup
operation was started.
• Immediately after changing the settings of DVD mode (while the
system is writing data automatically) do not turn the ignition key
(engine key) to OFF.
Otherwise, the settings may not be changed.
Changing the language setting
The audio language, subtitle language and menu language can be set
according to your preferences.
Once set, this becomes the default language. This function is convenient
when you always want to listen in English. (The language setting is not
effective on some discs. If not, the default language is set from the
factory.)
• When the settings are changed, the old settings are overwritten.
Make a note of the current settings before making changes. The
memory is cleared when the vehicle’s battery is disconnected.
• To temporarily change the language of the current disc, either do so
from the DVD menu or by using the operation described in the
section “Switching the Audio Tracks” (page 24).
• If the disc does not include the selected language, the disc’s default
language is set.
Set the language used for the menus (title menu, etc.).
Setting item: MENU LANGUAGE
Setting contents: AUTO / ENGLISH / JAPANESE / GERMAN /
SPANISH / FRENCH / ITALIAN / SWEDISH / RUSSIAN / CHINESE
• When “AUTO” is selected, the primary menu language among the
recorded ones is played.
Set the audio language produced from the speakers.
Setting item: AUDIO LANGUAGE
Setting contents: AUTO / ENGLISH / JAPANESE / GERMAN /
SPANISH / FRENCH / ITALIAN / SWEDISH / RUSSIAN / CHINESE
• When “AUTO” is selected, the primary audio language among the
recorded ones is played.
Setup
DVD Setup
The Parking Brake must be engaged to access the DVD
mode screen. Attempting to access this screen while driving
will display the warning-CAN’T OPERATE WHILE DRIVING.
The following steps 1 to 5 are common operations to each
“Setting item” of DVD Setup. Refer to each section for details.
Setting of the Menu Language
Setting of the Audio Language
68-08564Z42-A_F.book Page 29 Wednesday, January 24, 2007 2:26 PM