Filter
Top Products
36-EN
01GB05IVAW205R.fm
ALPINE IVA-W205R 68-08564Z42-A (EN)
With a rear camera connected, rear view video is output to the monitor.
Setting item: CAMERA IN
Setting contents: OFF / NTSC/PAL
• By shifting to reverse (R), the rear pictures are output.
This function is effective when the reverse wire is properly connected.
• To apply the setting, set to VISUAL “Setting the VISUAL Soft Button”
(page 37).
When you connect an optional navigation equipment, set it to ON.
Setting item: NAV. IN
Setting contents: OFF / ON
With an Alpine navigation system connected to the IVA-W205R/
IVA-W202R, the voice guidance of the navigation system will be mixed
with the radio or CD play.
Setting item: NAV. MIX
Setting content: OFF / ON
See “Adjusting NAV. Level” under “Adjusting the Audio” on page
26 to set the navigation interruption volume level.
• The volume level for voice prompts during navigation guidance is set
by adjusting its volume while the prompts are announced. When the
announcement finishes, the normal audio volume and the previous
audio screen are restored. The voice prompt volume is always at or
below the current listening volume. If a navigation announcement
cuts in while adjusting the audio level, it always resets to the current
level regardless of the audio level setting.
• This setting is effective when NAV. IN of SYSTEM list screen is ON.
Setting item: AUX IN
Setting contents: OFF / ON / VCR / GAME / TV / DVB-T / EXT. DVD
/ BLACKBIRD
• OFF is not displayed when the optional DVD player or DVD changer
is connected.
• When OFF is selected, the settings related to AUX cannot be changed
from this unit.
• The selected source name is displayed instead of AUX source name.
Select SOURCE to switch to the guide function of each mode.
• Only when an Alpine TV tuner is connected, you can operate the
displayed function guide from this unit.
After setting to ON in “Setting the AUX Mode,” this setting can be
carried out.
Setting item: AUX IN LEVEL
Setting contents: LOW / HIGH
After setting to ON in “Setting the AUX Mode,” this setting can be
carried out.
Setting item: AUX IN SIGNAL
Setting contents: NTSC / PAL
• The video input type can be changed.
Outputs the picture of the source selected on the
IVA-W205R/IVA-W202R connected to the rear monitor.
Setting item: AUX OUT
Setting contents: OFF / ON
Setting the Rear Camera Input
OFF: The CAMERA source is not displayed on the
VISUAL selection screen.
NTSC/PAL: Even if the shift lever is not set to reverse (R), the
rear pictures are output by selecting the CAMERA
source.
Setting the Navigation Mode
OFF: Navigation source is not displayed. The settings related
to the navigation cannot be changed from this unit.
ON: Navigation source is displayed.
Setting the Navigation Interruption
OFF: The navigation interruption mode is turned off.
ON: The navigation interruption mode is on.
Setting the AUX Mode
OFF: AUX source is not displayed.
ON: AUX source is displayed.
Adjusting the External Input Audio Level
LOW: Decreases the external input audio level.
HIGH: Increases the external input audio level.
Switching the Visual Input Signal System
Setting the Picture Output
OFF: The “REAR” item is not displayed on the Source Selection
screen.
ON: The “REAR” item is displayed on the Source Selection
screen.
Tou ch
[REAR] to change to the REAR select screen, then
touch the desired source. The selected source picture is
output on the rear monitor.
68-08564Z42-A_F.book Page 36 Wednesday, January 24, 2007 2:26 PM