Filter
Top Products
BASIC OPERATIONS (CONT.)
Figure 29
©American Audio® - www.AmericanAudio.us - Radius 1000™ Instruction Manual Page 25
12. Bank Buttons (26):
These buttons are used to store your samples and cue points. Only a sample or a
cue point can be stored into each of these three banks. When a sample is stored
in of the banks you may use the sample starting point as a cue point. The BANK
BUTTONS instantly recall and play any of your stored samples or cue points
without interrupting music playback. When in sample mode, (see "Using the
Built-In Sampler" on page 23) and during playback, pressing any of the BANK
BUTTONS that stores a sample, will immediately begin to play that sample with-
out interruption of music. If the unit is in sample mode and the drive is not in
playback mode, pressing any of the BANK BUTTONS that stores a sample, will
immediately begin to play that sample.
13. BANK PROGRAM BUTTON (26):
Once you store samples in the three (3) Bank Buttons, the Radius 1000 can be programmed to play the stored
samples in a desired order. You can program the three (3) banks up to 12 times. The programmed samples
can be played in your desired order without interrupting music playback. The programmed samples can be
played when the player is in Pause mode and even when the disc has been removed. If the unit is in sample
mode and the drive is not in playback mode, pressing any of the BANK BUTTONS that stores a sample, will
immediately begin to play that sample.
To program samples:
1) Once you have one or more samples stored. Press the BANK
PROGRAM BUTTON (26). The CHARACTER DISPLAY (41) will
now display BANK P. =01.
Figure 30
Figure 31
2) Program your Banks (Samples) in your desired order.
EXAMPLE: Bank 3; Bank 1; Bank 2; Bank 3; Bank 3; Bank 1. To
end programming, press the BANK PROGRAM BUTTON (26).
3) To play your programmed samples, press the SAMPLE BUTTON
(25) then press the BANK PROGRAM BUTTON (26).