Filter
Top Products
78
Set the sensitivity level that you want
using the
buttons 6.
When you have fi nished making your chang-
es,
press the MENU•OK button 7 and
then the DIS•ESC button 5 to exit the
menu.
Note:
You can set different sensitivity levels
for FM and MW or LW (AM).
Storing stations
Storing stations manually
Select the memory bank that you want
(FM1, FM2, FMT) or one of the wave-
bands (MW or LW).
Tune into the station that you want.
Press and hold down one of the station
buttons 1 - 5 :, for longer than two
seconds to assign the station to that
button.
Storing stations automatically
(Travelstore)
You can automatically store the fi ve sta-
tions offering the strongest reception in the
region (only FM). The stations are stored in
the FMT memory bank.
Note:
Any stations that were previously
stored in this memory bank are deleted
in the process.
Press and hold down the BND•TS but-
ton 4 for longer than two seconds.
The storing procedure begins.
u
u
u
u
u
“TRAVEL STORE PLEASE WAIT” appears
on the display. After the process has com-
pleted, the radio will play the station that
is stored in memory location 1 of the FMT
memory bank.
Listening to stored stations
Select the memory bank or waveband.
Press the station button 1 - 5 : of the
desired station.
Scanning receivable stations
(SCAN)
You can use the scan function to play all the
receivable stations briefl y. You can set the
scanning time from 5 to 30 seconds in the
menu in increments of fi ve seconds.
Starting SCAN
Press and hold down the MENU•OK
button 7 for longer than two sec-
onds.
Scanning begins. “SCAN” appears briefl y
on the display followed by a display of the
current station name or frequency.
Cancelling SCAN and continuing
listening to a station
Press the MENU•OK button 7.
Scanning stops and the radio continues
playing the station that it tuned into last.
u
u
u
u
Radio mode
02_NashvilleDAB47_gb.indd 7802_NashvilleDAB47_gb.indd 78 20.07.2007 11:48:21 Uhr20.07.2007 11:48:21 Uhr