Filter
Top Products
65
ENGLISH
Adjusting the volume
Note:
The internal amplifi er can be switched
off. If the loudspeakers do not emit any
sound, please read the section entitled
“Switching the internal amplifi er on/
off” in the “Amplifi er” chapter.
You can adjust the volume in steps from 0
(off) to 50 (maximum).
To increase the volume,
turn the volume control 3 clockwise.
To decrease the volume,
turn the volume control 3 anti-
clockwise.
Setting the power-on volume
You can set the default volume level at which
the device plays when it is switched on.
Press the MENU•OK button 7.
Press the
or button 6 repeat-
edly until “VOLUME” appears on the
display.
Press the MENU•OK button 7 to dis-
play the volume menu.
“ON VOLUME” and the currently set value
are displayed or “LAST VOLUME” is dis-
played.
Adjust the power-on volume using the
buttons 6 .
To help you adjust the setting more easily,
the device will increase or decrease the vol-
ume as you make your changes.
If you change the setting to “LAST VOLUME”,
the volume when the device switches on will
be the same as the volume level that was set
the last time you switched the device off.
u
u
u
u
u
u
Danger to hearing!
If the power-on volume is set to
maximum, the volume level can be very
high when the device is switched on.
If the volume was set to maximum before
the device was switched off and the power-
on volume is set to “LAST VOLUME”, the vol-
ume level can be very high when the device
is switched on again.
Severe damage to your hearing can be
caused in both cases!
When you have fi nished making your chang-
es,
press the MENU•OK button 7 and
then the DIS•ESC button 5 to exit the
menu.
Quickly reducing the volume
(Mute)
You can quickly reduce the volume to a pre-
set level (Mute).
Briefl y press button 1.
“MUTE” appears on the display.
Cancelling mute
To return to your previously set volume
level,
briefl y press button 1 again.
u
u
u
Adjusting the volume
02_NashvilleDAB47_gb.indd 6502_NashvilleDAB47_gb.indd 65 20.07.2007 11:48:19 Uhr20.07.2007 11:48:19 Uhr