Filter
Top Products
107
ENGLISH
Setting the left/right volume
distribution (balance)
To adjust the left/right volume distribution
(balance),
press the AUD•DEQ button ;.
Press the
or button 6 repeat-
edly until “BALANCE” appears on the
display.
Press the
or button 6 to adjust
the balance (right/left).
Press the AUD•DEQ button ; to close
the menu or press the
or button
6 to make further changes to the set-
tings.
Adjusting the front/rear volume
distribution (fader)
To adjust the front/rear volume distribution
(fader),
press the AUD•DEQ button ;.
Press the
or button 6 repeatedly
until “FADER” appears on the display.
Press the
or button 6 to adjust
the fader (front/rear).
Press the AUD•DEQ button ; to close
the menu or press the
or button
6 to make further changes to the set-
tings.
u
u
u
u
u
u
u
u
X-BASS
The X-BASS feature can be used to boost
the bass at low volume levels.
Adjusting the X-BASS boost
The X-BASS boost (Level) can be set in
steps ranging from 0 to 6 for one of the fol-
lowing frequencies: 32 Hz, 40 Hz, 50 Hz,
63 Hz or 80 Hz.
“LVL 0” means that no X-BASS boost will
be applied, and “LVL 6” means that X-BASS
will be boosted by the maximum amount.
Press the AUD•DEQ button ;.
“BASS” appears on the display.
Press the
or button 6 repeatedly
until “X-BASS” appears on the display.
Press the MENU•OK button 7.
The X-Bass menu is displayed. The frequen-
cy fl ashes.
Press the
or button 6 to set the
frequency that you want.
Press the
button 6.
The boost level (LVL) fl ashes.
Press the
or button 6 to set the
boost level that you want.
Press the AUD•DEQ button ;.
u
u
u
u
u
u
u
Sound X-Bass
02_NashvilleDAB47_gb.indd 10702_NashvilleDAB47_gb.indd 107 20.07.2007 11:48:25 Uhr20.07.2007 11:48:25 Uhr